Field note 032
The Manual Began with a Drawing of Two Smiling People
By M. J. Ellis
The manual began with a drawing of two smiling people lifting the box together, which was the first thing it lied about.
There was only one person.
Me.
And I wasn't smiling.
I'd purchased a bookshelf, which seemed like a reasonable thing to do. I own books. Some of them are currently living in stacks on the floor, where they have begun forming small, independent communities. A bookshelf would restore a little civilization to the situation.
The box had other ideas.
According to the packaging, assembly would take approximately thirty minutes.
This seemed optimistic, considering I'd already spent fifteen trying to open it without destroying the cardboard, because there was a small but persistent possibility I might need to return the entire thing.
Inside were seventeen wooden panels, two bags of hardware, an Allen wrench roughly the size of a house key, and a booklet containing no words.
Not one.
Apparently the manufacturer had decided that written language was an unnecessary complication in a process involving forty-seven nearly identical pieces of metal.
Instead, there were diagrams.
The diagrams were confident.
Step one showed a wooden panel lying peacefully on the floor.
Step two showed six screws entering the panel from various directions.
Step three showed an almost completed bookshelf.
Somewhere between steps two and three, an enormous amount of human suffering had been omitted.
I laid everything out on the floor.
The panels were labeled A through Q, although several of the stickers had fallen off during shipping. Two of them were stuck together. One was attached to the plastic bag containing the screws.
There were also three boards that looked exactly alike, except one had a tiny hole about four inches from the bottom.
I regarded it as a minor manufacturing detail.
A decorative hole, perhaps.
Something to give the wood character.
I began assembling.
The first screw went in beautifully.
This was encouraging.
The second went in at an angle that suggested it had somewhere else to be.
The third refused to acknowledge the existence of the hole it was supposed to enter.
I consulted the diagram.
The diagram showed a perfectly straight screw entering a perfectly round hole.
I looked at my screw.
I looked at my hole.
One of us was wrong.
Twenty minutes later, I'd discovered that the panel needed to be flipped over.
Remember that tiny decorative hole?
Apparently it was supposed to face inward.
The instructions had indicated this with a small dotted line that I had interpreted as a shadow.
I had built the opening stages of the bookshelf backward because I'd mistaken a critical structural detail for something intended to give the wood character.
I disassembled it.
The Allen wrench had already begun damaging my fingers. It's remarkable how a tool can be specifically designed for a task and still feel like something a medieval interrogator might keep in a drawer.
At step seven, the manual introduced a second person.
There they were again. Two smiling silhouettes, each using both hands to hold the bookshelf upright.
A fifth hand was reaching underneath to tighten a screw.
I studied the illustration.
Two people.
Five hands.
The manufacturer had solved the problem of furniture assembly by quietly introducing an additional limb.
I considered calling my wife.
Then I looked at the scattered boards, the half-assembled frame, and the growing pile of hardware.
Some things are easier to explain after they're finished.
Instead, I used my knee to hold one panel in place, my left hand to support another, and my right hand to turn the wrench.
For approximately eleven seconds, I was a functional piece of construction equipment.
Then the entire assembly collapsed sideways.
A wooden panel struck the floor with a noise that sounded expensive.
I remained perfectly still.
Sometimes, when something goes wrong, I find it useful to wait and see if the universe intends to apologize.
It did not.
The instructions continued to insist this was a thirty-minute project.
I'd been working for an hour and forty-five minutes.
I was beginning to suspect the thirty minutes referred to the time required for the factory to manufacture an entirely new bookshelf.
At step eleven, I encountered something truly disturbing.
The diagram showed a completed shelf being lowered into place.
There were no supporting brackets. No explanation of how it had gotten there.
Just a board floating gently downward, as though the instructions had temporarily suspended the laws of physics.
I tried lowering the shelf into place.
It didn't fit.
I tilted it.
It still didn't fit.
Eventually, I discovered that the entire bookshelf had to be partially disassembled to install the shelf.
Step eleven required undoing steps six through ten.
The manual neglected to mention this.
I began to wonder whether the booklet had been written by someone who had actually assembled the product.
Perhaps the manufacturer had never assembled one.
I was following instructions for an object whose existence had never been independently confirmed.
At some point, I began speaking to the manual.
Not asking questions.
Making accusations.
"That's not where that goes."
"Those aren't even the same screws."
"Where did that board come from?"
The illustrations remained cheerful.
The little people continued smiling.
They had never experienced disappointment.
They had never stripped a screw.
They had never spent twenty minutes searching for a small metal cylinder that rolled beneath a couch and apparently entered another dimension.
I hated them.
Eventually, the bookshelf began to resemble a bookshelf.
It had sides.
It had shelves.
It stood upright without requiring me to brace it with a foot.
These were promising developments.
I tightened the final visible screw and stepped back to admire my work.
There it was.
A bookshelf.
Not a particularly impressive bookshelf, but unmistakably a member of the species.
I gave it a cautious push.
It wobbled.
I tightened several screws.
It wobbled less.
I placed a book on the middle shelf.
Nothing happened.
Encouraged, I added three more.
The structure remained standing.
Human ingenuity had prevailed.
Then I looked down.
There was a screw left over.
One screw.
A perfectly ordinary screw, identical to the others.
I checked the bags.
Empty.
I checked the instructions.
Every pictured screw appeared to be accounted for.
I checked the bookshelf.
It stood there, silently refusing to explain itself.
Now, there are two possibilities.
Either the manufacturer had included an extra screw as a courtesy, or somewhere inside my newly completed bookshelf was a critical structural connection being held together by optimism.
I went back through the instructions.
All fourteen steps.
Nothing.
Finally, I placed the extra screw in a kitchen drawer, where it joined a growing collection of unidentified hardware from previous projects.
I don't know what any of those pieces belong to.
I'm increasingly uncomfortable with how much of my house might depend on them.
The bookshelf has been standing for three days now.
It looks nice.
I've arranged the books by subject, with the heavier ones near the bottom. Every now and then I give the frame a little nudge, just to see whether it's developed any new opinions about gravity.
So far, so good.
I still have the manual.
It's sitting in the drawer beside the extra screw.
On the last page, there is a drawing of the completed bookshelf.
Next to it are the same two smiling people from the beginning.
One of them is giving a thumbs-up.
I would very much like to speak with him.
Keep reading
Every Hobby Eventually Requires a Suspiciously Specific Tool